DIY Fabric Decoupaged Office Chair - Juniper Home

DIY Fabric Decoupaged Office Chair

DIY
 photo IMG_3197.jpg
For our little homework station project, I wanted to find a really inexpensive option for the girls’ desk chair. I bought the vintage wood desk at a store called Another Man’s Junk here in Phoenix and I love it’s simple lines, but I wanted the chair to feel a little more fun and youthful. I poked around online trying to find a cheap upholstered office chair to recover in a pretty fabric when I stumbled on these $20 chairs at IKEA. I thought they would be a good candidate for a decoupage project (this one has really stuck in my brain!).

 

 photo IMG_2954.jpg

I pulled out some pretty, lightweight cotton fabric from my stash. I had bought several yards of this gauzy cotton Nani Iro for Kokka Fabrics at Purl Soho for a client project a few years ago. We ended up choosing another fabric, so I kept the yardage and I’m so glad I did! It worked perfectly here.

Before we started with the decoupage, we sprayed the chair legs gold with Design Master’s Gold Metal and the chair back with a coral spray paint from Krylon which is supposed to work on plastics (and seems to be doing a good job of holding up).

 photo IMG_2968.jpg

 photo IMG_3343.jpg

I started by brushing on a pretty generous coat of matte Mod Podge on just the front of the chair back. I left the edges of the seat alone for this part and just worried about the front face.

 photo IMG_2989.jpg

 photo IMG_2995.jpg

I had figured out the pattern placement and cut out a section of fabric before I started glueing that was several inches bigger than the chair on all sides. I carefully placed the fabric on top of the Mod Podge layer and used my hands to smooth out all the bumps and wrinkles. It takes some work and time, but it’s really not all that hard to get a taut, smooth surface with the fabric.

 photo IMG_3037.jpg

When the upper chair back was smooth, I repeated the same process on the chair seat. Again, I left the edges dry at this point and worried just about the big surfaces.

 photo IMG_3050.jpg

If you do this project using the same IKEA chair, you’ll want to leave just a bit of fabric bunched around the curve of the seat (where the little hole in the back is).

 photo IMG_3054.jpg

 photo IMG_3060.jpg

Once the seat and the seat back were all smooth, I trimmed the excess fabric a bit more, just to make things more manageable, and then I brushed Mod Podge onto the face of the edges and started the same process of smoothing.

 photo IMG_3077.jpg

The corners and curves are really the only tricky part. I cut out some of the extra fabric in a triangle shape until the fabric sat perfectly smooth around the corner edge and then I glued it down with Mod Podge.

 photo IMG_3094.jpg

 photo IMG_3101.jpg

A damp cloth really helps smooth everything down and was a big help with the edges especially.

 photo IMG_3112.jpg

I cut away more fabric for the curve and the hole in the back of the chair before gluing the fabric down. Mod Podge is so easy to work with. It is so forgiving and can be repositioned for a long time.

 photo IMG_3138.jpg

 photo IMG_3147.jpg

Once the Mod Podge had dried (about an hour or two later), I ran an X-acto knife down the inside edge of the back. And then I brush on another little bit of Mod Podge along the edge to help seal the fabric and prevent fraying.

 photo IMG_3164.jpg

 photo IMG_3293.jpg

Once the whole chair was done and dry, I brushed on two thick coats of satin Polycrylic sealer on top of the fabric. This changed the look and feel of the fabric a bit – it sort of looks like laminated fabric now, or like the chair is made from a textured, printed plastic maybe? But the surface is solid and waterproof and easy to clean now, so I’m cool with it.

 photo IMG_3151.jpg

 photo IMG_3186.jpg

 photo IMG_3299.jpg

 photo IMG_3280.jpg

Still pretty cute, right? I love how it looks from the back especially, with the pop of coral!

 photo IMG_3288.jpg

It feels pretty indestructible and my girls love it. Win-win. :)

 photo IMG_3338.jpg

What did you think?
Leav a Comment

51 thoughts on “DIY Fabric Decoupaged Office Chair

  1. This might be one of my favourite projects you've ever done. I figured it must be modge podge – it looks awesome. Out of curiosity, do you think it was necessary to seal the fabric after or do you think it would have been fine without?

  2. I thought I recognized that fabric. LOVE Nano Iro gauze….so gorgeous. I think I will do this same thing to some knockoff plastic chairs that I have. If only I had that same three chair set up from Design Sponge. Soo great. Thanks for all the great DIY's Jenny. I should give you so much credit for helping me with my own old house. IT is was more inspired since I found your blog.

  3. I found a desk like that for $35 but I couldn't get there first! :( I ended up finding something else for $30 not as nice but it does the trick. Thanks for reminding me about Hodge Podge–I was going to use fabric glue to stick fabric on a poof but I think Modge Podge would work better! Happy Nesting.

  4. Do you see any reason decoupaging fabric wouldn't work on the walls inside of a closet? I have a few closets that are in need of an upgrade and the walls are too bumpy/crumbly for paint without a ton of work.

  5. I love this! And this is very timely as I'm in the early stages of redesigning my almost 10-yr old daughter's room. I also would love more information on that peg board organization system…did you DIY that as well or find as is? I desperately need some help figuring out what to do with all of her 'craft supplies!!'

    1. Pretty good! There was a little bit of bubbling on one part that I didn’t repair fast enough and the fabric ripped a little. But I patched it and it looks fine again. :)

  6. Lovely job well done! I’ve been looking for a good tutorial with clear instructions and great photographs that help and you gave both. Thanks. I’m off to look at what else you have on here :)

  7. Just tried clicking on the envelope sign at top of page to sign up to newsletter. I’m obvsiously missing something as it won’t let me do it so I’ve come back to do it here. Can’t wait to see your next posts. Thanks again.. Val

  8. So pretty! Curious how well the gold stayed on the plastic caster wheels? Just as I was about to spray paint my own (black plastic to metallic gold) someone mentioned that the paint is going to wear off where the caster meets the floor. Did you have this problem?

  9. Hi Jenny! I’ve loved this idea since I first saw it when you posted it many moons ago. Now, I’m in charge of a very low-budget makeover for a charity waiting room. There are currently a bunch of very colorful (dated!!) plastic stacking chairs that we don’t have funds to replace, and was hoping this idea would work. I’m hesitant that it won’t hold up though–any suggestions?? Thank you!!

  10. Such a lovely idea. I’m just wondering how long this chair lasted? Do you still have it today? Just cur7about the edges peeling or paint chipping on the plastic. Thank you

You May Also Like
View More