A few weeks ago I found a desk at Goodwill that was in not-so-great shape. The veneer on the table top was badly chipped and what was still there had pretty intense water rings and discoloration. The table base though, which is what really caught my eye in the first place, was in pretty decent shape, so I decided to buy the desk and cross my fingers that I could salvage the top.
To make the surface as smooth and even as possible, I whipped up a couple batches of Bondo that I applied in thin coats.
Bondo feels a little hardcore the first time you work with it (so, you know, maybe don’t try Bondo-ing an entire staircase like I did). It’s like epoxy in that you have to mix in a hardening cream and that you have only a few short minutes to apply the mixture before it starts to harden (also it has a very… distinctive smell). But, truly, it’s not that scary once you have a batch or two under your belt – and it repairs and seals like nothing out there.
Bondo’s finish is so smooth, unlike wood filler, and so strong, unlike plaster or putty. It sands beautifully so it’s not that hard to just get a rough coat down and then sand away the extra until you have a smooth surface. Just remember it’s easier to sand down the Bondo than to try and apply a perfectly-perfect surface with a spatula in the first place.
The wood base is still in “vintage condition” but it cleaned up pretty well with a quick wipe down of Restor-A-Finish on a rag and that was pretty much it! It’s so fun to have a new, super unique desk in my studio for almost no money!